The Key2Concrete construction database has been split into topic areas to help you find the article you are looking for. Use the menu below to browse to the subject you require, or alternatively, use the contents, or search facility above.

Connections & Fixings

Design & Standards

Environment

Information Sources

Joints & Interfaces

Lifting & Transportation

Materials

Miscellaneous

Torque Examples

 Published Date: 15/10/2009
Download Document

It is as important not to torque certain fixings as it is to torque those requiring it.  In principle, torque should be applied to fixings where a) two surfaces are in full contact over the full area, b) movement is not anticipated or desirable.  As movement may take place vertically between restraints, torque should not be applied at the fixing where such movement may take place.  Torque should not be used as a means of preventing loosening of nuts under vibration etc.  In such cases, locking nuts should be used.

The examples below are indicative of cases where torque is/is not to be applied.   The same principles apply for both sockets and cast-in channel.

torque.jpg
  ©2012 Cliff Billington on behalf of J&P Building Systems Ltd

Key2Concrete and J&P Building Systems: The content of this website and of the documents accessible within it, is provided in good faith. While every effort has been made to ensure that the contents are correct at the time of writing, details do change. Amendments will be made as and when necessary; website users and readers are advised to check for the latest edition. J&P Building Systems are not liable for any inaccuracies in the information provided. All advice from Key2Concrete and J&P is intended for use in the UK only by those who will evaluate the significance and limitations of its contents and take responsibility for its use and application. No liability (including that for negligence) for any loss resulting from such advice or information is accepted.